10 | VUIGI102 © Danfoss | 2018.01
2.19
Maximum temperature in return
pipe of previous month with date
stamp
Changing with date stamp every 1
second
2.20
Maximum temperature difference of
previous month with date stamp
Changing with date stamp every 1
second
2.21
Minimum temperature in flow pipe
of previous month with date stamp
Changing with date stamp every 1
second
2.22
Minimum temperature in return pipe
of previous month with date stamp
Changing with date stamp every 1
second
2.23
Minimum temperature difference of
previous month with date stamp
Changing with date stamp every 1
second
2.24 ...
2.590
The data of previous months with
date stamp (up to 36 previous
months)
Analogy
ID 2.8 ... 2.23
During installation of the meter, it
is possible to choose: to display the
data of the previous month only,
to display the data of the last two
months or to display the data of all
36 previous months *
LOOP 3 – informative parameters
3.1 Thermal power
3.2 Flow rate
3.3 Temperature in flow pipe
3.4 Temperature in return pipe
3.5 Temperature difference
3.6 Next replacement date of the battery
4. Operation of calculator
(continuous)
To Next Page
Loading...
