Danfoss SonoMeter 30 User Manual

User guide SonoMeter 30
12 | VUIGI102 © Danfoss | 2018.01
3.13* 1st pulse input/output configuration
Input:
Input (tariff activation):
Outputs:
energy,
quantity of liquid
Tariff *
Tariff condition:
Inputs:
Can be configured only for a
quantity of water.
Maximum pulse resolution is
displayed 0.00001 m3.
Outputs:
Can be configured for a quantity of
water (m3), for heating (In a shown
case) / cooling(additional snowflake
is displayed) energy or to one of
tariffs.
3.14*
2nd pulse input/output
configuration
Similarly ID 3.13, only
„1“,changes in the „2“
See 3.13
3.15 Type of heat-conveying liquid
Type of heat-conveying liquid: “---“
(crosses) - water
3.16
Pressure value for energy
calculations
“160E4”-corresponds to the pressure
1.6 MPa
3.17* Customer number Are transferred on telegram M-bus
3.18 Software version number
3.19 Serial number
3.20* M-Bus address
3.21
Working hours without a power
calculation error
3.22 Battery operation time
4. Operation of calculator
(continuous)
* values of the parameters can
be modified by installing a meter
with configuration software
SonoMeter30 UserConfig.
In the same way it is possible to
switch off indication of irrelevant
parameters.

Danfoss SonoMeter 30 Specifications

General

Brand	Danfoss
Model	SonoMeter 30
Category	Measuring Instruments
Language	English