Danfoss SonoMeter 30 User Manual

User guide SonoMeter 30
8 | VUIGI102 © Danfoss | 2018.01
LOOP 2 – statistical data
ID Parameter Value Description
2.1
Quantity of thermal energy on set
day with date stamp
Changing with date stamp every 1
second
2.2
Quantity of thermal energy for
cooling on set day with date stamp
When meter is intended for heating
and cooling, the two separate
displays are shown.
Changing with date stamp every 1
second
2.3
Tariff register 1 on set day with date
stamp
Is shown only if tariff function is active
Changing with date stamp every 1
second
2.4
Tariff register 2 on set day with date
stamp
Is shown only if tariff function is active
Changing with date stamp every 1
second
2.5
Volume of liquid on set day with
date stamp
Changing with date stamp every 1
second
2.6
1st pulse input pulse value on set day
with date stamp
Is shown only if pulse input is active
Changing with date stamp every 1
second
2.7
2nd pulse input pulse value on set
day with date stamp
Is shown only if pulse input is active
Changing with date stamp every 1
second
2.8
Quantity of thermal energy on set
day of previous month with date
stamp
The user chooses set day in the
month according to needs.
(If it is set up 31, the data will be
recorded in the last day of the
month)
Registration Time: 23:59:59
2.9
Quantity of thermal energy for
cooling on set day of previous
month with date stamp
Changing with date stamp every 1
second
4. Operation of calculator
(continuous)

Danfoss SonoMeter 30 Specifications

General

Brand	Danfoss
Model	SonoMeter 30
Category	Measuring Instruments
Language	English