EasyManua.ls Logo

Danfoss TP5000-RF - Frost Protection Setting; Battery Replacement

Danfoss TP5000-RF
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Battery Replacement
When batteries are low a battery symbol will
ash in the LCD display. You have 15 days to
replace the battery before the unit switches o .
When changing batteries, remove old batteries and insert new ones
within one minute and programming will not be lost.
IMPORTANT: always use high quality alkaline batteries
If you replace the batteries and the LCD does not come on
immediately please check battery orientation. Do not leave
batteries in the product if the display is not active.
NB. If the display ever goes blank during normal operation, the
batteries will need to be renewed, the unit reset and the time and
programmes reset.
!
16
03 57
Frost Protection
Press and together twice.
Use or buttons to set the
desired low temperature.
- At 5°C a snow ake symbol
appears indicating frost
protection mode.
- At all other temperatures an
arrow appears, indicating a
constant temperature selection.
To return to automatic programming press and
together again.
x 2
16
°
:
5
°
*
:
A constant low temperature between 5°C-30°C can be selected whilst
away from home.
User Instructions
GB

Other manuals for Danfoss TP5000-RF

Related product manuals