12
To convert to Thermostat mode
Press & hold and together until
display changes to colon blinking &
default temperature (8°C).
Press or to alter temperature as
required.
(If not already in Thermostat Mode, press
& hold and together until display
changes to colon blinking & 8°C).
Press DAY (display will show a suitcase
and :00).
Press + and - to enter number of days of
holiday (max.99).
Use and buttons to alter the constant
temperature, if required.
When selected number of days have elapsed,
the unit will return to normal, controlling
according to your set programmes.
NOTE: Press and buttons together
to exit holiday mode if necessary.
To programme Holiday Mode
(whilst in Thermostat Mode)
The TP7000 can be converted to control at a constant user selected
temperature, instead of following the set programme.
!
NOTE: unit will remain in thermostat mode until the and
buttons are pressed together again.
The TP7000 can control at a constant low temperature while you are away on
holiday, returning to your programmed settings after a speci ed number of
days (maximum 99 days).
User Instructions
GB
To Next Page
Loading...
Need help?
General
