Danfoss TP7000 Installation Instructions

7
(ES) Descripción de las funciones Sw 3 y 4 - Control
Cronoproporcional
100%
75%
50%
25%
0%
25%
50%
75%
100%
0%
Lastkurve
100%
75% 50%
25% 0%
Ein-Zeit
Aus-Zeit
Auslastung
-2.0˚C
-1.5˚C
-1.0˚C
-0.5˚C
Eingestellte
Temperatur
Xp
100% 75% 50% 25% 0%
-2.0°C -1.5°C 1.0°C -0.5°C 0°C
Chrono 3 Aus-Zeit (Minuten) 0.0 5.0 10.0 15.0 20.0
3 Zyklen / Stunde Ein-Zeit (Minuten) 20.0 15.0 10.0 5.0 0.0
Chrono 6 Aus-Zeit (Minuten) 0.0 2.5 5.0 7.5 10.0
6 Zyklen /Stunde Ein-Zeit (Minuten) 10.0 7.5 5.0 2.5 0.0
Auslastung
Standard-Modell mit 3/6 Zyklen pro Stunde
A
bweichung von
eingestellter Temperatur
100%
75%
50%
25%
0%
25%
50%
75%
100%
0%
Courbes de charge
100%
75% 50%
25% 0%
Marche
Arrêt
Charge de l'installation
-2.0˚C
-1.5˚C
-1.0˚C
-0.5˚C
Temp.
de
consigne
Xp
100% 75% 50% 25% 0%
-2.0˚C -1.5˚C 1.0˚C -0.5˚C 0˚C
Arrêt, (minutes) 0.00 5.00 10.00 15.00 20.00
Marche, (minutes) 20.00 15.00 10.00 5.00 0.00
Arrêt, (minutes) 0.00 2.50 5.00 7.50 10.00
Marche, (minutes) 10.00 7.50 5.00 2.50 0.00
Arrêt, (minutes) 0.00 2.50 5.00 7.50 10.00
Marche, (minutes) 10.00 7.50 5.00 2.50 0.00
Arrêt, (minutes) 0.00 1.25 2.50 3.75 5.00
Marche, (minutes) 5.00 3.75 2.50 1.50 0.00
Chrono 6
6 cycles/heure
Chrono 12
12 cycles/heure
Charge de l'installation:
Modèles C avec 6 ou 12 cycles par heure
Modèles standard avec 3 ou 6 cycles par heure
Bande proportionnelle:
Chrono 6
6 cycles/heure
Chrono 3
3 cycles/heure
(F) Description Fonction, Sw 3 & 4 régulation Chrono-
proportionnelle
100%
75%
50%
25%
0%
25%
50%
75%
100%
0%
Belastningskurve
100%
75% 50%
25% 0%
On-tid
Off-tid
Systembelastning
-2.0˚C
-1.5˚C
-1.0˚C
-0.5˚C
Indstillet
temp.
Xp
100% 75% 50% 25% 0%
-2.0°C -1.5°C 1.0°C -0.5°C 0°C
Off-tid (minutter) 0.00 5.00 10.00 15.00 20.00
On-tid (minutter) 20.00 15.00 10.00 5.00 0.00
Off-tid (minutter) 0.00 2.50 5.00 7.50 10.00
On-tid (minutter) 10.00 7.50 5.00 2.50 0.00
Off-tid (minutter) 0.00 2.50 5.00 7.50 10.00
On-tid (minutter) 10.00 7.50 5.00 2.50 0.00
Off-tid (minutter) 0.00 1.25 2.50 3.75 5.00
On-tid (minutter) 5.00 3.75 2.50 1.50 0.00
Tidsproportional 6
6 perioder pr. Time
Tidsproportional 12
12 perioder pr. time
Systembelastning:
C-modeller med indstillinger til 6/12 perioder pr. Time
Standardmodeller med indstillinger til 3/6 perioder pr. Time
Afvigelse fra indstillet temperatur:
Tidsproportional 6
6 perioder pr. Time
Tidsproportional 3
3 perioder pr. Time
(DK) Funktionsbeskrivelse Sw’s 3 & 4 - Chrono-proportional
Kontrol
100%
75%
50%
25%
0%
25%
50%
75%
100%
0%
Curva de carga
100%
75% 50%
25% 0%
Tiempo de
conexion
(On)
Tiempo
desconexion
(Off)
Carga del Sistema
-2.0˚C
-1.5˚C
-1.0˚C
-0.5˚C
Set
Temp
Xp
100% 75% 50% 25% 0%
-2.0°C -1.5°C 1.0°C -0.5°C 0°C
Crono 3 Off tiempo, (min) 0.0 5.0 10.0 15.0 20.0
3 ciclos por hora On tiempo, (min) 20.0 15.0 10.0 5.0 0.0
Crono 6 Off tiempo, (min) 0.0 2.5 5.0 7.5 10.0
6 ciclos por hora On tiempo, (min) 10.0 7.5 5.0 2.5 0.0
Crono 6 Off tiempo, (min) 0.0 2.5 5.0 7.5 10.0
6 ciclos por hora On tiempo, (min) 10.0 7.5 5.0 2.5 0.0
Crono 12 Off tiempo, (min) 0.0 1.3 2.5 3.8 5.0
12 ciclos por hora On tiempo, (min) 5.0 3.8 2.5 1.5 0.0
Carga del Sistema:
Modelos C con opción de 6/12 ciclos por hora
Modelos estandar con opción de 3/6 ciclos por hora
Desviación sobre el ajuste de temperatura:
(D) Zeitproportionale Steuerung

Danfoss TP7000 Specifications

General

Brand	Danfoss
Model	TP7000
Category	Thermostat
Language	English