Danfoss TPOne-M Installation Guide

24
TPOne-M
Information
TPOne will show information related to current operation, these
messages will be shown at the top of the display.
Information messages will be displayed while the operation is active
and will automatically reset when operation is completed
Window
Open
This will be displayed where a window open
switch has been tted and the window is opened.
see page 19
Product Lock This will be displayed where a product lock switch
has been tted and the switch has been activated.
see page 19
Optimised
Start
If the TPOne start up method is set to Optimised
Start this message will display while this feature
is active.
see page 18
Delayed
Start
If the TPOne start up method is set to Delayed
Start this message will display while this feature
is active.
see page 18

Danfoss TPOne-M Specifications

General

Display	LCD
Temperature Range	5°C to 35°C
Power Supply	2 x AA batteries
Frost Protection	Yes
Mounting	Wall-mounted
Protection Class	IP30
Model	TPOne-M
Brand	Danfoss
Temperature Control Accuracy	±0.5°C
Type	Room Thermostat
Compatibility	Heating systems