Danfoss TS715Si User Manual

TS715SI
10
GB
1. Press PROG once until SET ON TIME
appears at the top of the display
and MOTUWETHFR appears at the
bottom of the display.
Use the + or - buttons to set the
time you would like your system to
fi rst come on in the morning (Event
1).
2. Press NEXT ON/OFF once only.
Use the + or - buttons to set the
time you want your system to go off
(Event 2).
To move to the next setting, i.e.
when you would like your system to
come on again (Event 3) press the
NEXT ON/OFF button again.
3. Continue programming the system
ON and OFF times for weekday
Events 4, 5 and 6 as in Step 2.
4. Press the DAY/HOL button once
and SASU will appear at the bottom
of the display.
1.7.1 Programming the On/Off times in 5/2 day
mode
DAY/HOL
DAY/HOL
DAY/HOL
DAY/HOL

Danfoss TS715Si Specifications

General

Switch Rating	230V AC, 50Hz
Mounting	Surface
Operating Voltage	230V AC
Frost Protection	Yes
Display	LCD
Accuracy	±0.5°C
Protection Class	IP30
Type	Electronic
Programming	7 day
Battery	2xAA
Temperature Range	5°C to 30°C
Dimensions	86 x 86 x 36 mm
Control Mode	On/Off
Ambient Temperature	0°C to 50°C