TS715SI
8
GB
Press DAY/HOL to display day and
month. Use the + or - buttons to set the
correct month (Jan = 1, Feb = 2 etc.).
Press DAY/HOL to display day and
month. Use the + or - buttons to set day
of month.
Press PROG to display the time.
The words SET TIME will appear at the
top of the display and the time will fl ash
on and off .
Use the + or - buttons to set the correct
time (press and hold to change in 10 min.
increments).
Setting the Day
The day of the week is set automatically.
1.6 Accepting the preset programmes
If you are happy to use the preset programmes on page 6, you don’t
need to do anything else.
To accept the factory presets just press
the PROG button once until the time
appears and the colon in the display
begins to fl ash.
Your unit is now in RUN mode and will control your heating and hot
water according to the preset programmes.
7
To Next Page
Loading...
Need help?
General
