Danfoss VLT 6000 series Manual

VLT
®
5000/6000/8000 Series
Introduction
■
Introduction
Manual objectives
The pur
pose of this manual is to provide the user
with the necessary information to install, program and
start up the Danfoss VLT 5300-5500, VLT 6350-6550
and VL
T 8350-8550 frequency converters. This
manual should be read thoroughly before operating,
servicing or initializing the drives. This manual is
inten
ded for use along with the Danfoss Operating
Instructions Manual for the VLT 5000/6000/8000
frequency converters for detailed information.
Who should use this manual
This manual is intended for qualified service
personnel responsible for setting up and servicing
the Danfoss VLT 5300-5500, VLT 6350-6550 and
VLT 8350-8550 frequency converters. Qualified
personnel have previous experience with the
frequency converters and understand electrical
fundamentals, programming procedures, required
equipment and safety precautions.
Organization of the manual
This manual is arranged in equipment installation
and
connection sequence. The order of tasks
are arranged as follows:
•
Safety instructions
•
Tra
nsportation and unpacking
•
Technical data
•
Mechanical installation
•
Pre
-installation
•
Electrical installation guidelines
•
Control cable routing
•
Conn
ection examples
•
Electrical installation procedures
•
Motor start
MG.56.A2.02 - VLT is a registered Danfoss trademark
3

Danfoss VLT 6000 series Specifications

General

Brand	Danfoss
Model	VLT 6000 series
Category	Media Converter
Language	English