Danfoss VLT 8000 AQUA series User Manual

VLT
®
8000 AQUA
Programming
If the parameter 556 Bus time interval function
becomes active, relay 1 and relay 2 will become cut off
if they are activated via the serial communication.
Motor Alteration. The output is controlled by
a timer to activate alternate available run time
between multiple motors.
✭ = factory setting. () = display text [] = value for use in communication via serial communication port
MG.83.A2.02 - VLT is a registered Danfoss trademark
129

Danfoss VLT 8000 AQUA series Specifications

General

Brand	Danfoss
Model	VLT 8000 AQUA series
Category	DC Drives
Language	English