Danfoss VLT CDS 803 - Table of Contents

Contents
1 Quick Guide
2
1.1 Safety
2
1.1.1 Warnings 2
1.1.2 Safety Instructions 2
1.2 Introduction
2
1.2.1 Available Literature 2
1.2.2 Approvals 3
1.2.3 IT Mains 3
1.2.4 Avoid Unintended Start 3
1.2.5 Disposal Instruction 3
1.3 Installation
3
1.3.1 Before Starting Repair Work 3
1.3.2 Enclosure Types 3
1.3.3 Side-by-Side Installation 4
1.3.4 Dimensions 4
1.3.6 Connecting to Mains and Compressor 5
1.3.7 Fuses 7
1.3.8 EMC-Correct Electrical Installation 8
1.3.9 Control Terminals 9
1.4 Programming
11
1.4.2 The Start-up Wizard 12
1.4.3 Main Menu Structure 21
1.5 Acoustic Noise or Vibration
23
1.6 Warnings and Alarms
23
1.7 General Specifications
24
1.7.1 Mains Supply 3x200-240 V AC 24
1.7.2 Mains Supply 3x380-480 V AC 25
1.8 Special Conditions
29
1.8.1 Derating for Ambient Temperature and Switching Frequency 29
1.8.2 Derating for Low Air Pressure 29
1.9 Options for VLT
®
Compressor Drive CDS 803
29
Contents Quick Guide
MG18M102 Danfoss A/S © Rev. 09/2014 All rights reserved. 1