1 Screw at the bottom of the drive module that connects
to the top of the ground jumper plate
6 Ground bus bar
2 M10 nut 7 Ground jumper bus bar
3 Ground jumper plate 8 Side support bracket
4 M5 nut 9 Ground support bracket
5Ground plate ––
Illustration 1.9 Installation of Side Support Brackets and Ground Bus Bar Assembly
Installation Instructions
Bus Bar Kit for 6-pulse, 2-drive System
VLT® Series FC 102, FC 202, and FC 302
8
Danfoss A/S © 02/2016 All rights reserved. MI92I102
To Next Page
Loading...
