Danfoss VLT HVAC Drive FC 131 - Page 30

Parameter
Option/range
Default
Usage
Parameter 6-13
Terminal 53
High Current
0.00–20.00 mA
20 mA
Enter the current that corresponds to the high reference val-
ue.
Parameter 6-19
Terminal 53
mode
[0] Current
[1] Voltage
[1] Voltage
Select if terminal 53 is used for current or voltage input.
Parameter
30-22 Locked
Rotor Detection
[0] Off
[1] On
[0] Off
–
Parameter
30-23 Locked
Rotor Detection
Time [s]
0.05–1 s
0.10 s
–
AQ367426199594en-000101 / 130R098830 | Danfoss A/S © 2021.06
Programming
VLT® HVAC Drive FC 131
Operating Guide