3.15.6 15-4* Drive Identification
Parameters containing read only information about the hardware and software configuration of the adjustable frequency drive.
15-40 FC Type
Range: Function:
0 N/A* [0 - 0 N/A] View the adjustable frequency drive type. The readout is identical to the adjustable frequency drive
series power field of the type code definition, characters 1-6.
15-41 Power Section
Range: Function:
0 N/A* [0 - 0 N/A] View the adjustable frequency drive type. The readout is identical to the adjustable frequency drive
series power field of the type code definition, characters 7-10.
15-42 Voltage
Range: Function:
0 N/A* [0 - 0 N/A] View the adjustable frequency drive type. The readout is identical to the adjustable frequency drive
series power field of the type code definition, characters 11-12.
15-43 Software Version
Range: Function:
0 N/A* [0 - 0 N/A] View the combined SW version (or ‘package version’) consisting of power SW and control SW.
15-44 Ordered Typecode String
Range: Function:
0 N/A* [0 - 0 N/A] View the type code string used for re-ordering the adjustable frequency drive in its original config-
uration.
15-45 Actual Typecode String
Range: Function:
0 N/A* [0 - 0 N/A] View the actual type code string.
15-46 Adj Freq Dr Ordering No.
Range: Function:
0 N/A* [0 - 0 N/A] View the 8-digit ordering number used for re-ordering the adjustable frequency drive in its original
configuration.
15-47 Power Card Ordering No.
Range: Function:
0 N/A* [0 - 0 N/A] View the power card ordering number.
15-48 LCP ID Num.
Range: Function:
0 N/A* [0 - 0 N/A] View the LCP ID number.
15-49 SW ID Control Card
Range: Function:
0 N/A* [0 - 0 N/A] View the control card software version number.
VLT
®
HVAC Drive Programming Guide 3 Parameter Description
MG.11.C6.22 - VLT
®
is a registered Danfoss trademark
3-149
3
To Next Page
Loading...
