Danfoss VLT HVAC Series User Manual

1Introduction
VLT HVAC Drive
FC 100 Series
Software version: 2.8.x
This guide can be used with all VLT HVAC Drive adjustable frequency
drives with software version 2.8.x.
The current software version number can be read from
par.15-43
Software Version .
VLT
®
HVAC Drive Programming Guide 1 Introduction
MG.11.C6.22 - VLT
®
is a registered Danfoss trademark 1-1
1

Danfoss VLT HVAC Series Specifications

General

Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit
Communication Interfaces	Profibus, Ethernet
Cooling Method	Forced convection
Ambient Temperature	-10°C to +40°C
Enclosure Rating	IP20, IP21, IP55
Output Voltage	0 - 100% of supply voltage