Danfoss VLT HVAC Series User Manual

15-50 SW ID Power Card
Range: Function:
0 N/A* [0 - 0 N/A] View the power card software version number.
15-51 Adj Freq Dr Serial No.
Range: Function:
0 N/A* [0 - 0 N/A] View the adjustable frequency drive serial number.
15-53 Power Card Serial Number
Range: Function:
0 N/A* [0 - 0 N/A] View the power card serial number.
3.15.7 15-6* Option Ident.
This read-only parameter group contains information about the hardware and software configuration of the options installed in slots A, B C0 and C1.
15-60 Option Mounted
Range: Function:
0 N/A* [0 - 0 N/A] View the installed option type.
15-61 Option SW Version
Range: Function:
0 N/A* [0 - 0 N/A] View the installed option software version.
15-62 Option Ordering No
Range: Function:
0 N/A* [0 - 0 N/A] Shows the ordering number for the installed options.
15-63 Option Serial No
Range: Function:
0 N/A* [0 - 0 N/A] View the installed option serial number.
3 Parameter Description VLT
®
HVAC Drive Programming Guide
3-150 MG.11.C6.22 - VLT
®
is a registered Danfoss trademark
3

Danfoss VLT HVAC Series Specifications

General

Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit
Communication Interfaces	Profibus, Ethernet
Cooling Method	Forced convection
Ambient Temperature	-10°C to +40°C
Enclosure Rating	IP20, IP21, IP55
Output Voltage	0 - 100% of supply voltage