Name: Danfoss VLT HVAC Series
Brand: Danfoss
Rating: 5 (1 reviews)

To Next Page

To Previous Page

NOTE!

If Enable-Run Reverse is selected in par.24-00

Fire Mode Function

, Closed-loop cannot be selected in par.24-01

Fire Mode Configura-

tion

24-02 Fire Mode Unit

Option: Function:

Select the desired unit when fire mode is active and running in closed-loop.

[0] *

[1] %

[2] rpm

[3] Hz

[4] Nm

[5] PPM

[10] min

[11] RPM

[12] PULSE/s

[20] liter / sec.

[21] liter / min

[22] liter / hr.

[23] m³ / sec.

[24] m³/min

[25] m³ / hr.

[30] kg / sec.

[31] kg/min

[32] kg / hr.

[33] ton / min

[34] ton / hr.

[40] m / sec.

[41] m/min

[45] m

[60] °C

[70] mbar

[71] bar

[72] Pa

[73] kPa

[74] m WG

[75] mm Hg

[80] kW

[120] GPM

[121] gal / sec.

[122] gal/min

[123] gal / hr.

[124] CFM

3 Parameter Description VLT

HVAC Drive Programming Guide

3-230

MG.11.C6.22 - VLT

is a registered Danfoss trademark

Questions and Answers:

Need help?

Do you have a question about the Danfoss VLT HVAC Series and is the answer not in the manual?

Danfoss VLT HVAC Series Specifications

General

Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short circuit
Communication Interfaces	Profibus, Ethernet
Cooling Method	Forced convection
Ambient Temperature	-10°C to +40°C
Enclosure Rating	IP20, IP21, IP55
Output Voltage	0 - 100% of supply voltage