Danfoss VLT Soft Starter MCD 600 User Manual

Code
Description
121
Battery/clock
122
Thermistor circuit
124
RTD/PT100 B
133
Overpower
134
Underpower
142
LCP disconnected
143
Zero speed detect
144
SCR Itsm
145
Instantaneous overcurrent
146
Rating capacity
156
Current read error L1
157
Current read error L2
158
Current read error L3
160
Motor connection T1
161
Motor connection T2
162
Motor connection T3
163
Firing fail P1
164
Firing fail P2
165
Firing fail P3
166
VZC fail P1
167
VZC fail P2
168
VZC fail P3
169
Low control volts
170–182
Internal fault X. Contact the local supplier with the fault code (X).
8.2 Parameter Lists
N O T I C E
These parameter lists are for parameter list version 2.x. To check the parameter list version, read class 103d, instance 131, attrib-
ute 100.
For other parameter list versions, refer to the soft starter Operating Guide or contact the local supplier for assistance.
N O T I C E
The numbering of parameter options via communications starts at 0. For Phase Sequence, 0 = Any sequence, 1 = Positive only, 2
= Negative only.
AN353423548483en-000101 / 130R0945 | 25Danfoss A/S © 2020.12
Attributes
EtherNet/IP Card
Installation Guide

Danfoss VLT Soft Starter MCD 600 Specifications

General

Brand	Danfoss
Model	VLT Soft Starter MCD 600
Category	Controller
Language	English