Danfoss VLT Soft Starter MCD 600 User Manual

10 Specifications
10.1 Connections
Soft starter
6-way pin assembly
Contacts
Gold flash
Network
RJ45
10.2 Settings
IP address
Automatically assigned, configurable
Device name
Automatically assigned, configurable
10.3 Network
Link speed
10 Mbps, 100 Mbps (auto-detect)
Full duplex
Auto crossover
10.4 Power
Consumption (steady state, maximum)
35 mA@24 V DC
Reverse polarity protected
Galvanically isolated
10.5 Certification
RCM
IEC 60947-4-2
CE
EN 60947-4-2
ODVA
Illustration 6: ODVA
AN353423548483en-000101 / 130R0945 | 33Danfoss A/S © 2020.12
Specifications
EtherNet/IP Card
Installation Guide

Danfoss VLT Soft Starter MCD 600 Specifications

General

Brand	Danfoss
Model	VLT Soft Starter MCD 600
Category	Controller
Language	English