EasyManua.ls Logo

Dantherm CDT 30 MK III - Setup and User Guide; Product and Function Descriptions

Dantherm CDT 30 MK III
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Setup and user guide
Product and function descriptions
Introduction
This section provides a product description of the CDT30/40/60/90 MKIII, plus a de-
scription of its functionality.
How it works
How the air changes as it passes through
the dehumidifier:
The fan draws humid air through a filter inside
the dehumidifier.
The air is cooled, causing the moisture content
to condense into drops of water, which either:
are collected in the water container
(CDT 30-40-60) or
are passed through the drain hose to a
drain (CDT 90).
The air is reheated using heat from the dehu-
midifier operation (temperature increase of
approx. +5 °C).
As the air is repeatedly circulated through the dehumidifier, its moisture content is re-
peatedly reduced, resulting in rapid, gentle drying. The dehumidifier can run constantly,
or be controlled by a built-in hygrostat.
Continued on next page
CDT 30-40-60
CDT 90

Related product manuals