7
053322 • Version 1.0 • 5.12.2019
Preparation and transport guide
This section is a guide to unpacking, preparation, transport and storage
If the machine has been transported lying down, allow it to stand upright for at least 1
hour before use.
Follow these steps for unpacking the CDT 30-40-60:
Open the top of the pack-
aging
Position the box vertically,
with the wheels at the bot-
the box
Loosen the knobs, pull the
handle up to the desired
height and retighten the
knobs
Remove the protective foil on the control panel
Continued on next page
To Next Page
Loading...
Need help?
General
