Dantherm CDT 30S MK III - User Guide; Switching On;Off and Operating Status; Heating Element Operation

11
053326 • Version 1.0 •
13-12-2019
en
User guide
Switching on/off
and operating status
The table below shows operation of the on/off function and display texts.
Key
Display
ON – constant
INT HYG ON – operation controlled by internal hygrostat
INT HYG STOP, if internal hygrostat set point is reached
EXT HYG ON – operation controlled by external hygrostat
EXT HYG STOP, if external hygrostat set point is reached
Switch off
The green LED indicates active dehumidification
Operating the heat-
ing element
The integrated 1 kW heating element is activated by setting the
switch behind the water container to setting 1. Switch to O to de-
activate.
Continued on next page
Switch behind water container