Dantherm CDT 30S MK III - Display Text Interpretations

13
053326 • Version 1.0 •
13-12-2019
en
User guide, cont.
Display texts
The table below shows how to operate the operating information functions
Key
Feedback
XX°C – shows the current room temperature
Actual RH% - shows the actual relative air humidity value measured
XX kWh - shows total energy consumption. Cannot be reset
xxxxh - shows the total number of operating hours for the machine. Can-
not be reset
Text displays when
not connected to
mains
The machine has a built-in battery to allow reading text displays when not connected to
the mains. The following texts can be read when not connected to the mains:
Key
Feedback
hold down
and
press once
Displays total energy consumption in kWh
hold down
and
press once
Shows total number of operating hours for the dehumidifier
Continued on next page