35
Augers &
Accessories
DESCRIPTION PART NO.
2″ Hex 170610
The Python Wire Winder is
designed to meet the needs
of farmers, ranchers, and
fencing professionals. The
Python connects onto a 2”
hex hydraulic auger drive unit
and can wind up to 6 miles of
smooth or 3/4 miles of barbed
wire into convenient rolls.
2" ROCK DRILL - Pilot Holes
3′ LENGTH
DIA. NO. OF TEETH PART NO.
2" N/A 10739
WARNING
This product can expose you to chemicals known to the State of
California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov/product.
Cross Port Relief Valve 196035
1/2” Hose Holder Spring Kit 190172
1/2” Hose Kit, 108” with Couplers & Abrasion Sleeves
Includes 1/2” flush-face couplers (ISO 16028).
196027
1/2” Hose Kit, 108” with Abrasion Sleeves
Does not include couplers.
196025
Front-End Loader Hose Kit
1/2” hoses, 25’ long, with 1/2” flush-face couplers (ISO 16028) on one end to
connect to 196027 Hose Kit above (sold separately), and ISO 7241 Series A couplers
(compatible with ISO 5675 Pioneer couplers) on the opposite end to connect to tractor
rear remotes. Includes bolt-on/weld-on mounting bracket.
196056
1/2" Backhoe & Excavator Hose Kit, 54” long with Couplers & Abrasion Sleeves
Includes 1/2" flush-face couplers (ISO 16028).
206032
1/2" Backhoe & Excavator Hose Kit, 54” long with Abrasion Sleeves
Does not include couplers.
206031
Male Coupler (1/2" flush-face, ISO 16028) 10048
Female Coupler (1/2" flush-face, ISO 16028) 10049
HOSES & HYDRAULIC ACCESSORIES
PYTHON WIRE WINDER
1/2” flush-face
couplers (ISO
16028)
Hose Holder
Spring Kit
AUGER ADAPTERS
DRIVE UNIT AUGER COLLAR PART NO.
2″ Hex to 2-9/16″ Rd. 10921
2″ Hex to 2″ Rd. 10922
2″ Hex to 2-9/16″ Rd. *20211
2″ Hex to 2″ Rd. *20214
*Allows attachment of augers with 1/2" diameter bolt.
2" ROCK DRILL
DESCRIPTION
PART NO.
Pilot 10745
DESCRIPTION
PART NO.
To Next Page
Loading...
