Danuser EP Series - Drive Unit Specifications

9
Drive Unit
Specifications
Torque and output speed specifications are based on theoretical values and are provided for comparative purposes only.
EP Auger Systems Model EP615 Model EP1020 Model EP1530 Model EP2035
Overall Width (A) 10"
Overall Height (B) 29"
Weight 141 lbs. 142 lbs. 143 lbs. 143 lbs.
Minimum Hydraulic Flow 6 GPM 10 GPM 15 GPM 20 GPM
Maximum Hydraulic Flow 15 GPM 20 GPM 30 GPM 35 GPM
Maximum Continuous Operating Pressure 3500 PSI
Maximum Auger Diameter 24" 30" 36" 36"
Output Spindle 2" Hex
Model EP615
GPM
6 8 10 12 14 15
RPM
36 48 60 73 85 91
PSI
2000 2500 3000 3500
TORQUE
1014
Ft.-Lbs. 1267 Ft.-Lbs. 1520 Ft.-Lbs. 1774 Ft.-Lbs.
Model EP1530
GPM
15 18 20 24 28 30
RPM
49 59 65 78 92 98
PSI
2000 2500 3000 3500
TORQUE
1874
Ft.-Lbs. 2342 Ft-Lbs 2811 Ft-Lbs 3279 Ft-Lbs
Model EP2035
GPM
20 22 26 30 32 35
RPM
48 53 63 73 78 85
PSI
2000 2500 3000 3500
TORQUE
2529
Ft.-Lbs. 3161 Ft.-Lbs. 3794 Ft.-Lbs. 4426 Ft.-Lbs.
Model EP1020
GPM
10 12 14 16 18 20
RPM
48 58 68 77 87 97
PSI
2000 2500 3000 3500
TORQUE
1270
Ft.-Lbs. 1587 Ft.-Lbs. 1904 Ft.-Lbs. 2222 Ft.-Lbs.
B
A
Operator's Manual
Direction Terminology
Front
Rear
Right
Left