1 Introduction
OM Hydraulic Stone and Concrete Splitter, Version 1.0 04/2010 5
1.5.4 General Symbols
z This dot marks the descriptions of activities which you should carry out.
– This dash marks specifications.
¹ This arrow marks a cross reference.
If a cross reference to another chapter is necessary in the text, this is shortened for
clarity.
Example: ¹ OM, 2 Safety Instructions
This means: See Chapter 2 Safety Instructions,
in the Operating Manual.
If the cross reference refers to a page, figure or position number, this information is
added at the end of the cross reference.
Example: ¹ Fig. 4 - 4, Pos. 1
This means: See figure 4 position number 1
(in chapter 4 of this operating manual).
(3) Numbers in brackets refer to the positions in figures.
To Next Page
Loading...