EasyManua.ls Logo

darda C2S - Responsibilities of the Personnel

darda C2S
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 Introduction
6 OM Hydraulic Stone and Concrete Splitter, Version 1.0 04/2010
1.6 Responsibilities of the Personnel
Before beginning work, all persons entrusted with jobs using the devices are re-
quired
to heed the fundamental regulations on industrial safety and accident preven-
tion.
to read the safety instructions and the warning information contained in this
product manual and to confirm with their signature that they have understood
them.
(
¹ IM, Annex A – List of Signatures)
Please regard the following instructions in the interest of all staff:
z Refrain from any method of working which might present a safety risk!
z Follow all danger and warning instructions in this product manual!
z Please also regard the general, statutory and otherwise binding regulations on
industrial safety, accident prevention and environmental protection!
z Regard the fire-alarm and fire-fighting possibilities and
inform yourself about the location and operation of fire extinguishers!
z Wear the protective clothing that is appropriate for the work to be performed!
z Do not have open long hair, loose clothing or jewellery (including rings)!
z Perform only work for which you have been sufficiently trained and instructed!
z Do not perform any service work without prior consultation with the manufac-
turer and the operator!
z Do not make any structural changes without approval in writing from the manu-
facturer (except what is described in this product manual)!
z Ensure that other persons who do not work with the devices (and consequently
do not know the risks of the devices) cannot enter into the danger zones.
z Shut down the devices in case any danger occurs! Protect the device against
accidental start-up and notify the operator / supervisor immediately!