6 Replacing Splitting Heads
OM Hydraulic Stone and Concrete Splitter, Version 1.0 04/2010 33
6.4 Cleaning
Only clean the device after shutting it down beforehand!
Before starting to clean, read the chapter about the shut-down procedure.
¹ 5.5 Shut-down Procedure
z Remove
– coarse splitting material which has settled on the device during work manu-
ally at regular intervals.
Wear personal protective gear for this work
(such as respiratory equipment, face mask)!
– To remove moisture from the bearings, the device must be lubricated after
cleaning.
6.5 Repair
We call your attention expressly to the fact that repair work on the devices
that are not described in the documentation is principally not allowed for
reasons of safety!
Guarantee claims will not be honoured if the security lacquer or the lead seal
is damaged!
To Next Page
Loading...