darda C2S - Protective Gear

2 Safety Instructions
16 OM Hydraulic Stone and Concrete Splitter, Version 1.0 04/2010
2.9 Protective Gear
When working on / with the device, wear the personal protective gear that the
relevant safety instructions require!
Work with the device is not allowed without personal protective gear!
2.9.1 Class S1 safety shoes
When performing tasks such as
– transport
– commissioning
– operation
– maintenance, cleaning, servicing,
wear safety shoes in class S1 according to IEC 61310.
2.9.2 Personal face mask for protection class 2 with a mechanical strength A!
When performing tasks such as
– commissioning
– operation
– maintenance, cleaning, servicing,
wear a face mask in protection class 2 according to EN 166.
2.9.3 Protective gloves with pulse protection and
– an abrasion resistance of power level 4
– a cut resistance of power level 4
– an average resistance of power level 4
When performing tasks such as
– transport
– commissioning
– maintenance, cleaning, servicing,
wear protective gloves with a pulse protection according to IEC 61310.