Darfon B09ULF - Page 28

27 / 47
3.4.2 Single cabinet wiring
a. The B+ terminals
of BAT1, BAT2,
BAT3, and BAT4 are
connected by a wire
harness(labeled
5619100023331).
b. Use a wire harness (labeled
5619100023611) to lead from
the B+ terminal of BAT2
through the waterproof
connector to the positive
terminal of the external
inverter BAT side.
c. Connect the B-terminal of
BAT1 to the B-terminal of
BAT2 using a wire harness
(labeled 5619100023341).
d. Connect the B-terminal
of BAT1 to the B-terminal of
BAT4 using a wire harness
(label5619100023351)
Address 0
ADDR: 0000
Address 2
ADDR: 0100
Address 1
ADDR: 0010
Address 3
ADDR: 0110