Data Aire DAP III Instructions

Data Aire, Inc. DAP
TM
III BACnet Integration Instructions
Engineering Document - 600-000-460
Page 2 of 13
Table of Contents
1
Overview.....................................................................................................3
2 Hardware Requirements and Installation ............................................3
2.1 Required Network Card........................................................................3
2.1.1 The BACnet MS/TP protocol interface . ...................................................3
2.1.2 The BACnet IP protocol interface............................................................3
2.2 Network Card Installation ....................................................................4
2.2.1 For BACnet MS/TP interface ..................................................................4
2.2.2 For BACnet/IP interface .........................................................................5
2.3 Network Wiring .....................................................................................5
2.3.1 For RS-485 Multidrop network connection ...............................................5
2.3.2 For the Ethernet connection ...................................................................6
3 Communication Port Setting...................................................................6
3.1 The RS-485 communication Port............................................................6
3.2 For BACnet/IP communication UDP port................................................6
4 BACnet Object Definitions ......................................................................7
4.1 Binary Value Objects............................................................................7
4.1.1 Readable fields................................................................................7
4.1.2 Object List .......................................................................................7
4.2 Analog Input Objects..........................................................................10
4.2.1 Readable fields..............................................................................10
4.2.2 Object List .....................................................................................10
4.3 Analog Value Objects.........................................................................10
4.3.1 Readable fields..............................................................................10
4.3.2 Object List .....................................................................................11
4.4 Multi-State Value Objects...................................................................13
4.4.1 Readable fields..............................................................................13
4.4.2 Object List .....................................................................................13
4.5 References ..........................................................................................13

Data Aire DAP III Specifications

General

Brand	Data Aire
Model	DAP III
Category	Security System
Language	English