AIR-COOLED FLUID COOLER
35 • Air-Cooled Condenser Manual
8.0 FREQUENTLY ASKED QUESTIONS (FAQ)
NOTICE:
1. This Frequent Asked Questions (FAQ) section applies only to the
standard units unless specified.
2. This Frequent Asked Questions Section does not apply to units with
special options or special design. This is based on factory settings.
3. Important. This is only for guideline and reference only. Subject to
change without notice. We reserve the right for product design
improvements. Information and data in this section maybe time sensitive.
4. Please refer to Maintenance section or other sections operating or setup
matters
Full load Amps. Represents the amount of
current a motor is designed to draw at the
rated horsepower.
Minimum circuit ampacity. This is used to
help determine the wire size.
Maximum Overcurrent Protection device.
This is to help determine the maximum
protective device.
What is the input voltage tolerance?
In general it is +/- 10% but refer to
Electrical section for more details.
Will all units operate at 50 or 60 hertz
power?
No. This depends on the model and
options selected. Consult with Data Aire
for details.
Does the unit require an electrical
ground?
Yes. All units require a true earth ground.
What size field wire size is required to
connect to unit?
Refer to National Electric Code for wire
ampacities size.
To Next Page
Loading...
Need help?
General
