DataCard SD260LTM Quick Install Guide

11 SD460 SLM Laminating System
SD460 Laminating System Quick Install Guide
11
6. Power On the System
Press the power button on the front of the printer. The
printer and laminator perform internal checks and initialize
supplies.
The laminator contains heaters for the L1 and L2
cartridges, and for the impresser if one is installed. It can
take several minutes for the heaters to reach their correct
operating temperature before the system is ready to print
cards.
7. Install the Card Printer Driver
RefertotheSD and CD Series Card Printers Quick Install
Guide or the printer’s Driver Guide to install the Card
Printer Driver and connect the system to a single PC or to
a network.

DataCard SD260LTM Specifications

General

Brand	DataCard
Model	SD260LTM
Category	Printer
Language	English