Sentry K350 hardware encrypted USB flash drive - User Guide
• Confirm Ownership of the device: Enter the Windows username and password that is associ-
ated with the login credentials of the computer the device is plugged into.
• Custom Device Information: Required information about you or your device. The required
fields will vary.
• Unique User Token: This token is directly associated with the end user’s account and will be
provided by the SafeConsole administrator usually via email.
• Administrator Registration Approval: The SafeConsole administrator may require their ap-
proval to proceed with device registration.
7. Select your desired file system from the “Format” prompt. Click Continue. See Selecting the
Correct File System.
8. After formatting, your device will show the “Control Panel”. See Using a SafeConsole Man-
aged Device for more information.
NOTE: The “Unlocker” client will generate a Password Recovery Code after your next device un-
lock. It is recommended that your device be disconnected and reconnected to ensure your
Password Recovery Code is saved to the SafeConsole.
Using a SafeConsole Managed Device
Unlocking in SafeConsole Mode
Once the K350 is registered to SafeConsole, the Secure Volume can be accessed by following the
steps below:
1. Log into your K350. Your K350 will show a “Waiting. . . ” prompt.
2. Select the option Unlocker.exe inside of the Unlocker partition that can be found in File Ex-
plorer.
3. Click the Unlock button shown on the DataLocker Unlocker screen.
4. The private partition, also referred to as Secure Volume, will be mounted to a separate drive
letter on your workstation. The Secure Volume can also be accessed by clicking the Folder
Icon in the DataLocker Control Panel.
© 2021 DataLocker Inc. All rights reserved. 15
To Next Page
Loading...