EasyManua.ls Logo

DataLocker Sentry K350 - Device Information

DataLocker Sentry K350
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Sentry K350 hardware encrypted USB flash drive - User Guide
Warning: Performing this action will completely erase all data on the Secure Volume. This action is
permanent.
The ability to sanitize a drive depends on the settings configured by your SafeConsole administra-
tor. If allowed your drive can be sanitized by the following steps:
1. Unlock your K350 and open the device Control Panel by launching Unlocker.exe.
2. Right click the system tray icon for the Control Panel and select Sanitize Device.
3. Enter the numbers prompted in the dialog box to confirm that all data can be wiped from
the drive.
4. The device will reset. Unplug and plug your K350 back into your workstation.
5. You will need to initialize your K350, see Getting Started for more information.
6. Log into your K350 and launch Unlocker.exe. You will be prompted to format the Secure
Volume, see Reformat Using DataLocker Control Panel for more information.
Device Information
Before Unlocking
To see information about the device without logging into it, power on your K350. Before entering
the password, press the Enter-button.
Device information shown:
QR Code Serial Number
Alpha-numeric Serial Number
Firmware Version
Capacity
Certification Logos
Patent Information
After Unlocking
More information can be obtained after logging into the device and launching the Unlocker.exe
application.
Use the Capacity Meter, located at the bottom right of the DataLocker Control Panel, to see how
much storage space is still available on your device. The green bar graph represents how full the
device is. For example, the meter will be completely green when the device is full. The white text
on the Capacity Meter displays how much free space remains.
For general information about your device, see the “Device Info” page.
To view device information:
1. Unlock your device and click Settings on the menu bar of the DataLocker Control Panel.
2. Click Device Info in the left sidebar.
The About This Device section includes the following details about your device:
© 2021 DataLocker Inc. All rights reserved. 22

Related product manuals