Datalogic Applications
User’s Manual 109
l. VNC Password
This field allows VNC communication to be authenticated, so prying
eyes cannot remotely connect to and control your device. This field
is blank by default.
Advanced Settings
These settings must match settings on DXU in order for the DXU
desktop application to communicate with the your device. A
mismatch will result in a communication failure, which will block all
configuration functionality.
Change these settings only if you understand precisely any
advantage you may gain by doing so. Most users will not realize any
advantage from changing these port settings.
Find these settings in the DXU Agent application on the DL-Axist.
To configure DXU Agent’s Advanced Settings, do this:
1. Launch the DXU Agent application.
2. Tap the Recent Apps button to display the menu.
3. Tap the “Advanced Settings” button.
As with the DXU Agent settings listed above, these advanced
settings can only be changed when the “Enable Service” check box is
cleared.
To Next Page
Loading...
