Datalogic Applications
User’s Manual 161
Create pairing tag
Allows to create a DXU pairing tag, an NFC tag that binds the device
to the DXU Desktop application, over a Wi-Fi connection, without
any user interaction. The tool is intended to be used by both the
device and the DXU desktop application.
The user interface lists the information to be written on the tag. A
light on the right side states whether an information is present
(green) or not (red):
To create the tag, you need to enter:
• IP and port to access the DXU Desktop application.
• Wi-Fi connection parameters (SSID, password and security).
To Next Page
Loading...
