Datalogic DL-Axist User Manual

Settings
User’s Manual 75
Ethernet Configuration
To enable ethernet communication:
1. Tap Settings > Ethernet configuration.
2. Select the Ethernet check box to turn on ethernet.
By default, the DL-Axist is configured to obtain IP addresses
automatically via DHCP server. Alternatively, the device can be
configured to use a statically assigned IP address.
1. Tap Ethernet Preference.
2. Select Static IP under Connection Type, and then input the IP
address and any additional information based on your network
configuration.

Datalogic DL-Axist Specifications

General

Brand	Datalogic
Model	DL-Axist
Category	PDA
Language	English