Datalogic DL-Axist User Manual

Connections
192 DL-Axist™
Near Field Communication (NFC)
NFC technology allows short-range, wireless data transfer between
the terminal and NFC tags or other NFC enabled devices placed in
close proximity to the back of the terminal.
DL-Axist support the following modes of operation:
• NFC tag reader/writer mode: the terminal reads and/or writes
digital information from or to an NFC tag.
• Peer-to-Peer (P2P) mode: the terminal uses Android Beam
and/or Bluetooth@ technology to transfer screen content
(e.g., a picture, web page url, or file) between NFC enabled
devices.
•NFC card emulation mode - The terminal emulates an NFC
card (smart card) that an external card reader can access.
Read NFC Tags
1. Make sure NFC is enabled (see “Enable NFC” on page -77).
2. Hold the NFC tag close to the back of the terminal.
3. When an NFC tag is recognized, the terminal emits a sound and
the tag data displays on the terminal screen.
See also “Tap2Deploy (NFC)” on page -32 and “Tap2Deploy” on
page -158.
NOTE
Suspend mode and the screen lock temporarily turns the
NFC radio off.

Datalogic DL-Axist Specifications

General

Brand	Datalogic
Model	DL-Axist
Category	PDA
Language	English