Datalogic Applications
User’s Manual 113
Add Device
This button opens the “Add Device” dialog which allows you to type
the IP address of a device. This dialog does not support DNS naming
of devices. You can also use a custom TCP port if you have
configured your device to use one in DXU Agent. For convenience,
this field pre-populates with your PC’s IP subnet. You need only type
in the last number of your device’s IP address if it is in the same
subnet as your PC.
This dialog allows you to manually connect to devices running DXU
Agent that are either inside your PC’s subnet or outside it. The
limitation is that devices on other subnets must be on a subnet that
is routable from your PC’s subnet. Consult with your network expert
for more information.
Once connected, devices that respond to DXU’s query over the
network will display in the Available Devices list.
Load Configuration
Clicking the “Load Configuration” button opens a standard file dialog
that allows you to explore for and select a DXU configuration file.
Loading a configuration allows you to edit a device’s configuration
when the device is not connected to DXU. This also allows you to
To Next Page
Loading...
Need help?
General
