Datalogic Applications
User’s Manual 147
Unlock the Screen Using Remote Control
You can unlock the screen by dragging your mouse on the Remote
Control screen in the same manner as a user swiping on the device’s
screen.
To start Remote Control and unlock a device’s screen:
1. Launch DXU.
2. Connect the device to DXU either directly using USB or on the
network via Wi-Fi or Ethernet, or scan a Scan2Pair label.
3. Click the device’s button in the “Available Device” list.
4. Click the “Remote Control” button.
5. If the device is suspended, with its screen off, click the Power
button (3) at the bottom of the Remote Control window.
6. Click on the lock icon and drag it rightward, releasing it over the
unlocked lock icon at the right edge of the Remote Control
window.
1. Home Button
At the bottom of the Remote Control window, the Home button
activates the device’s Home button, which switches the display to
the Home screen.
To Next Page
Loading...
