Datalogic Applications
160 Falcon™ X4
AutoStart Options
The table below shows the options you can use when writing a line in
the Autostart.ini file.
Cold Reset Only: This will cause the line to execute only after a Cold
Reset.
Description Character Comments
Comment: This line will not
be executed.
‘#’ OR ‘ ‘ (space)
This may only be used as the
first character of the line. If the
comment option is specified in
the options elsewhere, it is
ignored.
Do not wait on line
completion: This will cause
the line to execute and
immediately move onto the
next line.
‘-’
Query: Request user
confirmation when running
the executable.
‘?’
This will halt parsing the
Autostart.ini until the
confirmation is answered. This
is intended for debugging the
Autostart.ini file.
Execute only on Cold Reset ‘!’
Execute only after a warm
boot
‘%’
NOTE
An empty line will be treated as a comment line.
To Next Page
Loading...
