User’s Manual 173
Connections
There is more than one way to connect the Falcon X4 to a host PC
running Windows. Each requires specific connections in order to
function properly.
Windows Mobile® Device Center
The desktop application Windows Mobile® Device Center allows you
to synchronize information between a desktop computer and your
Falcon X4. Synchronization compares the data on the Falcon X4
with that on the desktop computer and updates both with the most
recent information.
Windows Mobile® Device Center can be downloaded from Microsoft
website www.microsoft.com. It is only compatible with Windows
Vista and Windows 7; if you run Windows XP or earlier, you have to
download Microsoft ActiveSync.
You can establish a connection to your Falcon X4 through the
following interfaces:
• USB either directly or through the Single Dock.
• RS232 either directly or through the Single Dock.
•Bluetooth® (see Bluetooth® Manager Device Setup on
page 67)
To establish a partnership between the Falcon X4 and a host PC,
start Windows Mobile® Device Center and follow the steps below:
1. Connect the Falcon X4 to the host PC. Windows Mobile® Device
Center configures itself and then opens.
To Next Page
Loading...
