Datalogic Falcon X4 - Connect to Other Bluetooth Devices

Settings
User’s Manual 69
Connect to Other Bluetooth® Devices
1. From the Bluetooth Manager control panel, tap Connections:
2. Search for available Bluetooth® devices by tapping the button
for the type of device you want (Printer, Serial or All) or tap
Discovery > Discover to skip this step. The Falcon X4 will search
for Bluetooth® devices within range.
NOTE
If you attempt to set up a connection when the Bluetooth®
radio is disabled, you will receive a message reminding
you that the radio is turned off, and asking if you want to
turn it on. Tap Yes if you need to enable the Bluetooth®
radio.