User’s Manual 25
Getting Started
Power On
The Falcon X4 turns on when the battery pack or the external supply
is inserted and the ON/OFF Power button is pressed.
As soon as the mobile computer is on, the Windows Embedded
Compact 7 desktop will appear on the screen. Wait a few seconds
before starting any activity so that the mobile computer completes
its startup procedure.
The mobile computer goes into power-off (low power with display
and keyboard backlight off), when it is not used for more than a
programmable timeout, which can be defined in the Power applet of
the Control Panel. In this mode it can be awakened by the ON/OFF
key.
NOTE
The mobile computer can also be awakened or suspended
programmatically.
To Next Page
Loading...
