Getting Started
User’s Manual 41
LED Indicators
The LEDs illuminate to indicate various functions or errors on the
reader. The following tables list these indications.
LED Status Description
Charging LED
(left side)
Red Constant Light is solid red while charging.
Green Costant
Light is solid green once the charging
process has completed (full charge).
Red Blink Blinking red indicates a charge fault.
Amber Blink
Light is blinking amber when the
device raises a notification to the user.
Keyboard LED
(center)
Off Keyboard in primary.
Yellow Constant Yellow alternate key mode.
Blue Constant Blue alternate key mode.
Pink CapsLock enabled.
Good Read LED
*
(right side)
* The Good Read LED has also a "Suspend LED" feature. The decode LED will glow red
when the device begins to suspend, and will turn off when the suspend completes
successfully.
Red
Light is red from the time the user
presses the scan key (or trigger) until
the barcode is decoded (1D models), or
until the scanner times out (2D imager
models).
Green
Light changes to green when a good
decode is completed.
To Next Page
Loading...
