Datalogic Falcon X4 - Connection to USB Peripherals

Connections
User’s Manual 177
Connection to USB Peripherals
You can connect the Falcon X4 to a standard 101-key USB keyboard
or to a standard USB flash memory device. Connect the terminal to
the Datalogic Handylink micro USB host cable (together with a
standard A to micro A USB cable if needed
*
). For all these devices
maximum current draw must be less than 100mA.
* A standard USB cable is needed only if the USB hard driver or flash memory
device does not include its own cable with a "A" plug on it.
Standard A
to Micro A
USB Cable
Falcon X4
Standard A to
Micro A USB
Cable
Keyboard with USB interface
94A051971 Cable from
device (Handylink) to
female USB. Device
works as host
USB hard drive/
external memory
source
Falcon X4
Standard
A to Micro A
USB Cable
94A051971 Cable from
device (Handylink) to
female USB. Device
works as host