Connections
178 Falcon™ X4
Connect the single slot dock to the peripheral using an A to B USB
cord (together with a standard USB cable if needed
*
).
* A standard USB cable is needed only if the USB hard driver or flash memory
device does not include its own cable with a "A" plug on it.
NOTE
Falcon X4 works with most of the mentioned USB
peripherals. Datalogic cannot guarantee the
interoperability of Falcon X4 with all devices on the
market.
NOTE
Connection complies to USB 2.0 standard.
NOTE
The actual data transfer speed can be appreciably lower
than the maximum theoretical speed.
USB hard drive/
external memory
source
94A051969
Cable from Micro
USB (device or
dock) to female
USB. Device
works as host
94A150057
Single Slot Dock
Standard
A to Micro A
USB Cable
94ACC1381
Power Adapter
To Next Page
Loading...
