Data Capture
170 Falcon™ X4
Imager 2D Data Capture
The imager uses digital camera technology to take a digital picture of
a barcode, the image is stored in memory and software decoding
algorithms are executed to extract the data from the image. The
omni-directional scanning does not require that the operator orient
the barcode to align with the scan pattern.
To scan a barcode symbol:
1. From the Decoding Properties window, tap the barcode icon to
open the Decoded Data window.
or
From the WEC7 desktop, double-tap the Microsoft WordPad
icon:
To Next Page
Loading...
